detector switches/ese31 design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. ? es38 ? 1 e 2 s 3 e 4 5 6 7 8 9 product code design no 1 3 6th l r left-side operation type right-side operation type type 2hl detector switches type: ese31 features increased the mounting strength mounting strength: 80 n decreased the pro? le of the switch body height: 1.7 mm increased the contact reliability and lifespan. lifespan: 100,000 operations or more recommended ap pli ca tions detection of media in portable electronic equipment explanation of part numbers speci? cations rating 50 a 3 vdc to 10 ma 5 vdc (resistive load) contact resi stance 500 m max. (initial) insulation resistance 100 m min. (100 vdc) dielectric withstanding vo ltage 100 vac for 1 minute operating force 390 mn max. mounting height 1.7 mm poles and throws 1-pole 1-throw full travel (pushing distance) 3.2 mm (2.15 mm) op er at in g li fe 5 0000 cycles min. temp erature range 10 c to +70 c heat resistance +85 ? for 96 hours low temperature resistance 40 c for 96 hours humidity resistance +6 0 c 90 % to 95 % rh for 96 hours minimum quantity/packing unit 2500 pcs. emb ossed taping (reel pack) quantity/carto n15 000 pcs. oct. 2012 00
detector switches/ese31 design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. ? es39 ? pwb mounting hole for reference horizontal on position measuring position vertical direction on starting position vertical direction horizontal direction 1.1 1.5 1.6 1.7 0.5 5.5 5.9 2- 1 0.05 0.5 0.05 3.2 2.3 1.2 1.05 (2.5) 1.45 5.45 0.1 0.26 0.25 2.5 0.1 5.2 2.5 0.6 (1) operation point 2.8 0.42 1.2 11 3.5 7.45 +0.05 ? 1.2 1.6 1.7 6.1 6.0 5.6 9.0 1.1 +0.05 ? 1.1 1.3 2.5 0.14 (8.65) 5.4 4.35 r3.8 5.75 1.1 2- c0. 2 horizontal on position measuring position 380.0 2.0 16.4 packed portion cover tape carrier tape end top drawing direction pilot holes leading portion 400 mm min. non-packed portion (160 mm min.) non-packed portion (100 mm min.) 16.0 0.3 1.75 0.1 7.5 0.1 p=12.0 0.1 1.5 +0. 1 0 13.5 4.0 0.1 2.0 0.1 common terminal common terminal common terminal c1 c c common terminal common terminal common terminal c 1 c c pwb mounting hole for reference horizontal on position measuring position vertical direction on starting position vertical direction horizontal direction horizontal on position operation point 1.1 1.5 1.6 1.7 0.5 5.5 2- c 0.2 5.9 2- 1 0.05 0.5 0.05 3.2 2.3 1.2 1.05 (2.5) 1.45 5.45 0.1 0.26 0.25 2.5 0.1 5.2 2.5 0.6 (1) measuring position 2.8 0.42 1.2 1 1 3.5 7.45 +0.05 ? 1.2 1.6 1.7 6.1 6.0 5.6 9.0 1.1 +0.05 ? 1.1 1.3 2.5 0.14 (8.65) 5.4 4.35 r3.8 r0.2 5.75 1.1 circuit diagram dimensions in mm (not to scale) packaging speci? cations standard reel dimensions in mm (not to scale) no. 1 ESE31L11T no. 2 ese31r11t 1-pole 1-throw 1-pole 1-throw ese31r11t taping reel embossed carrier taping 1-pole 1-th row (n . o) ESE31L11T oct. 2012 00
|
